How do I configure my Cisco Linksys E4200 router?

How do I configure my Cisco Linksys E4200 router?

Configuration for Linksys E4200

  1. Access the router’s browser-based utility. Log into your router’s browser-based utility by entering 192.168.
  2. Go to the “Setup” menu. Click on the “Setup” tab.
  3. Go to the “Basic Setup” page. Click the “Basic Setup” page.
  4. Enter the first DNS resolver. Enter 208.67.
  5. Save your settings.

How do I change my Linksys e4200 router name and password?

Changing the router’s wireless network name and password using Linksys Connect

  1. Launch Linksys Connect.
  2. On the main Linksys Connect window, select Router settings then click Change.
  3. Under the Personalize section, click Change to modify your router’s name and password.

How do I log into my Linksys router in bridge mode?

How to set up the Linksys Dual-Band WiFi Router as Bridge Mode

  1. Log in to the Linksys Dual-Band WiFi Router’s web interface and skip the setup if prompted by clicking Cancel.
  2. Click the Configuration tab.
  3. Click Connectivity.
  4. Click WAN Setup page.
  5. In the WAN Setup page, click the Bridge Mode option.
  6. Click Save.

What is the Linksys admin password?

admin
Linksys routers use “admin” as the default administrator password.

How do I access my router after bridge mode?

Launch a web browser from a computer or mobile device that is connected to the network of the router that will run in bridge mode. Type http://www.routerlogin.net. A login screen displays. Enter the router user name and password.

What if I don’t know the E4200’s password?

If you don’t know the E4200 password, a reset will bring the router back to its factory default settings so that the default password works. Here’s how to reset the E4200 router: Plug in the router and turn on the power. Look for a light on the router that indicates the power is on. It may be near the network cable or on the front of the device.

What is the default password for the Linksys E4200 router?

The default password for the Linksys E4200 router is admin, and this password is case sensitive. The E4200 doesn’t have a default username. The Linksys E4200 does have a default IP address, though: 192.168.1.1.

How to disable guest access on the Linksys E4200?

To disable guest access, select no. Guest network name By default, the setup software sets up the name of the guest network . Linksys E4200 Chapter 2: How to Use Cisco Connect Maximum Performance Wireless-N Router9

How do I Reset my Netgear E4200 router?

Here’s how to reset the E4200 router: Make sure the router is plugged in and powered on. Flip the router over so that you have access to the bottom. With something small and pointy (like a paperclip), press and hold down the tiny Reset button for 5–10 seconds.