How do I load paper into my HP LaserJet 600 m602?

Table of Contents

Pinch the release lever that is located on the rear paper guide and slide it to the correct paper size. Load the paper into the tray.

How do I choose which HP tray to print?

From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2. From the Paper Size drop-down menu, select the appropriate paper size for the print job. Click Apply, and then OK to confirm your selections.

Where is tray 2 on an HP printer?

Right-click your printer, and then select Printing Preferences. The Printing Preferences window opens. Click the Paper/Quality tab. From the Paper Source drop-down menu, select Tray 2.

How do I load paper into my HP 600 printer?

To avoid jams, do not load trays while the product is printing….Load an optional 1,500-sheet tray

Press the release and open the door of the 1,500-sheet tray.
If paper is in the tray, remove it.
Pinch the guides at the front of the tray and slide them to the correct paper size.
Load the paper into the tray.

How do I load paper into my HP Laserjet 600?

Paper and print media

Open Tray 1.
Pull out the tray extension.
Load the paper into the tray. Make sure that the paper fits under the tabs and below the maximum-height indicators.

How do you put a paper tray back in the printer?

Loading paper in paper tray

Pull the paper tray completely out of the machine.
Open the output paper tray cover (1).
Gently press and slide the paper guides (1) to fit the paper size.
Fan the stack of paper well to avoid paper jams and misfeeds.
Gently put the paper into the paper tray print side down.

How do I put the tray extender back on?

Insert the tool into the gap in the paper tray (where the extender goes when it is closed) as close to the body of the printer as possible. Gently press on the edge of the extender that is inside the paper tray. The extender should give slightly.

How do I print to a different tray?

NOTE: The steps may differ depending on your application.

From within your application, click File => Print.
Click Properties.
Click on the Basic tab.
In the Paper Source dropdown choose the Tray that you want to print from.
Click Apply => OK.
Click OK or PRINT, depending on your application.

How do I add a tray 2 to my printer?

Click the Accessories tab and click Auto Detect. After Tray 2 has been detected, click Apply. – If Auto Detect does not detect the tray, you can manually add it. Under Available Options, select the tray, click Add and then Apply.

What is the HP number of the sheet paper tray?

HP 500 Sheet Paper Cass. Tray, RM1-4559-020CN . . . . Identische Artikel: MSP5983 – HP 500 Sheet Paper Cass.

How do I use the paper tray on my printer?

Open Tray 1. Pull out the tray extension. Load the paper into the tray. Make sure that the paper fits under the tabs and below the maximum-height indicators. Adjust the side guides so that they lightly touch the paper stack but do not bend the paper.

What is the paper size for the optional tray?

Optional tray to increase paper capacity. Holds Letter, A4, Legal, A5, B5 (JIS), Executive, and 8.5 x 13 inch paper sizes. The product can accommodate up to four optional 500-sheet feeders. Optional tray to increase paper capacity. Holds Letter, Legal, and A4 paper sizes. Enables the product to print A6-size paper from Tray 2.