How do I update my TP-Link av500 firmware?

Table of Contents

How to upgrade TP-Link Powerline Adapters?

Plug your computer into the Powerline adapter with Ethernet cable.
Click Upgrade Firmware.
Click Browse again a select the related NVM file from download folder.
Click OK and wait a moment until finish.
Click Reset to make the new functions take effect.

Can you update Powerline adapters?

Plug your computer into the Powerline adapter with Ethernet cable. Run the CD and install the Utility. Run it and you will see the “Upgrade Firmware” button in System tab.

How do I update my TP-Link adapter?

Right-click on My Computer on desktop and select Properties; Click Device Manager on the left side. Find and select the adapter, it might be in the Network Adapter or Other devices section. Right click it, and select Update Driver Software…

Does TP-link router automatically update?

If your TP-Link router supports Cloud service, you do not have to manually download and install the firmware any longer. Now a customer can simply click the Upgrade icon and the router itself will complete the whole process automatically. Note: 1.

How do I speed up my TP Link Powerline?

A few changes can help you speed up your powerline network.

Use the Most Efficient Setup.
Distance Matters. Image Credit: Zyxel.
Beware Circuit Breakers and Power Cables.
Filter Out Noise.
Upgrade to a Faster Network.
Don’t Mix and Match Adapter Types.

How do I update tpPLC utility firmware?

For your reference: How to prepare for using the tpPLC Utility on Windows?

Go to the Update page.
Select the obtained update file(s), and click Update.
Wait for the upgrading to complete. Note: During the upgrading process, do not turn off or reset the powerline device.

What is the powerline key?

Actually, each Powerline device has a Powerline Key (or called Password) which is 16 characters at its back. Add this Powerline Key to the existing Powerline network, the Extra Adapter will be added to the existing Powerline network.

How do I find my TP-Link firmware version?

Open the utility ，move your mouse over a device, and click the (Basic) icon. Go to the Version page. Here you see the current firmware version of this device.

Is powerline slower than Ethernet?

A 500Mbps Powerline was on an average twice as fast as 200Mbps Powerline kits, and the gigabit 1,000Mbps or 1,200Mbps about a third faster still. Other factors in speed include the speed of the Ethernet connection. 200Mbps and 500Mbps Powerline adapters with 10/100 Ethernet ports have a max rate of 100Mbps.

How to update TP-Link router firmware?

Step 1. Download the latest firmware version for your device. Go to download center for your Region on the TP-Link website. Then, select the appropriate drop downs for your TP-Link product.

How to upgrade tl-pa7020p kit firmware using NVM and PIB files?

Click Browse and select the related NVM file from the download folder. Click Browse again a select the related PIB file from download folder. Note: For TL-PA7020P KIT, the following dialog will pop up,and click Browse to select the downloaded file on the computer. GGL: TAR formatted file that is used for upgrading TL-PA7020P KIT’s firmware.

How do I upgrade the firmware of my powerline Ethernet adapter?

Plug your computer into the Powerline adapter with Ethernet cable. Run the CD and install the Utility. Run the utility and you will see the “Upgrade Firmware” button in the Main page.

What should I do if my TP-Link router cannot support TP-Link cloud?

Case 1. If your TP-Link router cannot support TP-Link Cloud service, please upgrade the firmware manually. 1) Some models have multiple hardware versions. Please verify the hardware version of your device. When upgrading use only firmware for the same hardware version.