AdministratorHow do you finish a calcium silicate board?
Calcium Silicate Board can be cut easily, drilled and nailed by using normal tools. Sanding/Graing could be done on site to smooth the edges. -For timber frame, use kiln-dried timber to avoid shrinkage. -For metal frame, use galvanized metal to avoid corrosion/rust with thickness between 0.4-1.2mm.
What is calcium silicate ceiling?
Calcium Silicate Ceiling is also called as calcium silicate false ceiling or calcium silicate ceiling board, which is classified as fiber cement reinforced calcium silicate products made up of portland cement, fine silica, special cellulose fibers and selected fillers to offers amazing features in impact resistance.
What is the difference between gypsum board and calcium silicate board?
The gypsum board is made of gypsum, and the surface is made of special cardboard as the protective surface. It is a processed plate, while the calcium silicate board is mainly made of siliceous and calcium materials through various processes.
What is the difference between cement board and calcium silicate board?
Fiber cement board is made by cement,fiber etc..which through the pulping,papermaking, Finally the machine compressed the molding. Calcium Silicate Board is made by the calcium and fiber which through the papermaking.
What is the quality of the calcium silicate board?
We are supplying good quality calcium silicate boards (100% asbestos, meerschaum and Brucite free), and non-asbestos fiber reinforced calcium silicate boards. -Percentage of water swelling:≤0.25%
What is calcium silicate sheet?
Calcium Silicate Sheet is specially designed for applications which impact resistance, fireproof, waterproof, sound adsorption and heat isolation are required, products are suitable in a high humid environment. have been supplying to Singapore, Malaysia, UK, India, UAE, Italy and etc with best prices and cost. Bending Resistance: 17.5 N/SQ.M
Can calcium silicate panels be exposed to moisture?
If exposed to moisture, the board will completely recover on drying out, with no permanent loss of strength. Calcium Silicate Panels will not degrade with time and within normal applications, the life of the product is limited only by the durability of the supporting structure and materials used in fastening.
Do you need a butt joint for calcium silicate board?
Pre-drilling the board is a must unless self-embedding, self-drilling head screws. Since calcium silicate board is subject to slight dimensional changes, a butt joint can be used in dry partitioning areas or where an exposed joint appearance is acceptable.