Is the TR-08 analog?
Roland TR-08 Features: Re-creation of the classic TR-808 drum machine using proprietary Analog Circuit Behavior technology. Provides hands-on control over tone, level, tuning, and decay.
Is the TR-08 stereo?
Individual outputs are available over USB. The TR-08 works the way the TR-09 does. You get only stereo out (or split mono out); for more outs, you can parts separately over USB.
When did TR-808 release?
1980
1980-1982. The Roland TR-808 was officially in production for just two years—from 1980 to 1982. Around 12,000 units were manufactured and although it received support from early adopters like Japan’s Yellow Magic Orchestra, it wasn’t considered a commercial success.
Why is it called 808?
If you’re into hip-hop and pop, you’ve probably heard “808” at some point. That’s a reference to the iconic Roland TR-808, a drum machine created by Ikutaro Kakehashi in 1980.
How do I reset my Roland TR 08?
To perform a factory reset on your Roland TR-8:
- Hold the CLEAR button while turning the power on.
- The display will say “rSt” and the START/STOP button will blink. If you change your mind, turn off the power.
- The display will say “CNP” and the SCATTER LEDs will blink. Power cycle the TR-8.
- Factory reset complete!
Is the Roland TR-09 discontinued?
As of this writing, the TR-09 has been discontinued but is still widely available, while the TR-08 can be picked up for $379/£369. Like all of Roland’s Boutique machines, the TR-08 and TR-09 offer miniaturized approximations of the original units, with modern functionality.
What is the difference between the TR-8 and the 08?
Just like the TR-8, the 08 has two different kick drum models: the original, and a long decay version that mimics the common 808 mod responsible for what we nowadays think of as an 808 kick.
How does the 08 stay true to the original?
The 08 stays true to the original by having no way to manually tap in more than one sound at a time. You can play all sounds at once via MIDI (or you can even attach a Boutique keyboard), but this input does not get written into patterns.
Can I use the TR-08 with a DAW?
The audio output of the TR‑08 is available for USB interface duties, but unfortunately there’s no way to mute the internal audio or mix it with computer audio via either the main or headphone out. So if you record/monitor the drums in your DAW they will double-up and flam with the local output.
How do I use the swing button on the TR-08?
On the TR‑08 you can simply tap the Bank button and the tempo fine control knob becomes a Swing control. You also get Substeps, effectively doubling the resolution or number of steps in Patterns.