What does the Holley Dominator do?
In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator® systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them….ADVANCED TUNING ICF.
What’s the difference between Holley Dominator and Terminator?
The Dominator or the Terminator X Max use same Universal harness. The difference between the two is in the ECU options.
Does Holley EFI add horsepower?
Holley HP EFI dyno run data. Max horsepower with the Holley HP EFI and base fuel map tuning hit 587.8 at 6,500 RPM and max torque was achieved at 544.8 at 5,100 RPM. Compared to the baseline carb dyno run, there was only slightly over a 13 horsepower difference.
Is Holley HP EFI self learning?
This self-learning fuel strategy eliminates one of the most difficult, time-consuming areas of EFI tuning, and that is tuning the base fuel table.
Does Holley sniper have TPS output?
The Super Sniper has programmable outputs. If you have the base Sniper, then you might be able to use the A/C cutout. It’s preprogrammed to turn off the A/C based on TPS position. So you could use that output (which is ground) and then change the TPS % to what you need.
Is Holley EFI worth?
Is Holley Sniper Efi Worth It? In this case, the Holly Sniper EFI system is a good choice if you want a simple EFI system that will grow with you. 99% of engines with a bolt pattern similar to the throttle body can be handled by this engine.
What is closed loop on Holley EFI?
Closed Loop & Learning isn’t active during periods of acceleration enrichment or deceleration (zero TPS, 400 RPM above target idle). The engine needs to be at “steady-state” RPM for the Learning to function, at lower RPM. The Closed Loop Status has many momentary periods when it’s inactive (Open Loop mode).
What is closed loop compensation?
In a closed-loop timing compensation system, the monitored circuit’s propagation delay is incorporated in a feedback loop, and the difference between the monitored value and the target propagation delay (given by the circuit targeted frequency) is minimized through the tuning of the body-bias.
What is Dominator EFI?
Dominator EFI The new standard in EFI with virtually unlimited capabilities! Integrated electronic transmission control, drive by wire throttle control, dual wideband oxygen sensor capability, extensive amount of inputs and outputs for various combinations, and much more.
Why choose Holley EFI Terminator X?
Also included is Holley EFI’s industry-leading, easy to use software suite that allows full laptop access for advanced users. Whether you are building a budget beater or a boosted race car, Terminator X has the features and technology you need at a price that won’t break the bank!
What is Holley EFI?
Free EFI Tuning Software for complete control of your Terminator X power plant Holley is the new standard in EFI! Whether you’re engine swapping your classic car or need to manage 4000 horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever!
Is the ECU compatible with HP or dominator EFI?
Compatible with HP or Dominator EFI, and Terminator X EFI. Real-time ECU tuning, allows you to make quick tune changes, without needing to hook up a laptop!