What heads came on 327 Chevy?

What heads came on 327 Chevy?

It’s two half-ovals connected by a straight bar-most easily described as “two humps.” Some of these are also nicknamed “Fuelie” heads because a version appeared on fuel-injected 327-powered Chevy Corvettes. These heads appeared on 327 and 350 cubic inch engines across most of the 1960s (beginning in 1962).

What Corvettes had a 327?

What Corvettes Had A 327? During this period, the Chevelle Corvette Z06 had a 327-cubic-inch V8 and a power output of 375 horsepower. The 1963 Corvette’s top-trim came with a suspension/brake package first introduced by Chevrolet, the Z06 package.

What year Corvette had a 327?

1965 L79 Production & History So, it was in 1965 that the hot hydraulic cam, L79 327 engine first appeared in the Corvette and the Chevelle. For the record, the L76, 365hp 327 outsold the 350hp L79 in the Corvette, 5011 to 4716. There were also 771 1965 Corvettes with the L84, 375hp fuel-injected 327.

What was the last year they put 327 in a Corvette?

The 350 cubic-inch engine made 385 horsepower, finally dethroning the 1964 Corvette’s 327 as the highest horsepower small-block. For the C6 Corvette Z06, Chevrolet engineers created a 427 cubic-inch small-block (7-liter) V8. Released in 2006, the engine was the largest small-block V8 in history.

Are camel hump heads any good?

Any camel hump head is a candidate for a street engine build. But the key is what you have to spend to make them useable. A lot of them are cracked in the exhaust seat area. If you find a set of original stock heads, you’ll need a valve job, exhaust seats, valve guides – maybe screw in studs/guide plates.

How much HP can you get out of a 327?

Rated at 375 hp, the fuel-injected 327 was a high-winding screamer, as satisfying to drive as any big-block. At the other end of the spectrum, the 327 was also offered at much more pedestrian power levels, as low as 210 hp (gross).

How much horsepower does a 1968 Chevy 327 have?

How Much Horsepower Does A 1968 Chevy 327 Have? For the first time, the 1967 and 1968 Chevrolet lineup included one with two-barrel carburetors. They developed 210 horsepower at 4,600 rpm and 322 foot-lbs while it reached a top speed of 78 mph. Torque is 2,400 rpm and the power density is 1,200 HP.

What kind of top does a 1968 Corvette have?

Drivers of the ’68 Corvettes had three options of how to put the top on. Soft top (in black, white, or beige) or removable hardtop- pick either one as standard or order them both together. There is a big story in glass for the ’68 Corvette Convertible. Like the Coupe, and like all previous Corvettes since ’53, a rustless fiber glass body is basic.

How much does a 327 Corvette cost?

Notes: Base Corvette Coupe with 327 cu. in. 300 hp engine and three speed manual transmission: $4,663.00. Base Corvette Convertible with 327 cu. in. 300 hp engine and three speed manual transmission: $4,320.00.

What kind of carburetor does a 1968 Corvette use?

Rochester 4-barrel downdraft carburetors are used in the 300-,350- and 390-hp engines while the 400- and 435-hp power plants utilize a Holley triple 2-barrel downdraft system. All Corvette engines in ’68 feature Air Injection Reactor equipment to control exhaust emission.

What makes a 1968 Corvette Stingray so special?

For 1968, the mechanics of the Stingray were improved and refined; this year was an inspiring year in terms of design. This Corvette boasted uncommon, removable sections over pilot and navigator, that lift out for open air moving. A nearly vertical glass rear window tucks out of the way into a compartment in the luggage area.