AdministratorWhat is the purpose of pulley in rear derailleur?
“The pulley wheels are a given they’ll reduce friction no matter what. And the bearings will spin slower regardless. But we design the OSPW so there’s lower cage tension.
How do I know if my rear derailleur is worn out?
Worn Derailleur All derailleurs wear out at some point. Check for wear by pulling laterally on the lower cage. Compare this movement in the linkage of a new derailleur. Sloppy pivot and linkages will produce inconsistent shifting, and the only solution is a new derailleur.
Which is the G pulley?
The ‘G’ or guide pulley, sometimes called the centeron pulley goes in the top position closest to the cassette. Most can go either way around but some have a certain direction of rotation, if that’s the case with yours they will have a direction arrow on them.
What pulleys will fit on my derailleur?
The pulleys that will actually fit on your derailleur are determined by the generation of your group set. This is a number stamped on every part and goes by a four digit number.
How do you remove the pulley from a SRAM derailleur?
Remove pulley bolts using a hex wrench. Pulleys and cage plate of SRAM® Force derailleur. The Mavic® Mektronic derailleur has many internal parts, including electronic parts. There are very few user serviceable parts. The pulley wheels can be brushed clean with a dry bush.
How do you remove the pulley from a Mavic derailleur?
Remove pulley bolts using a hex wrench. Pulleys and cage plate of SRAM® Force derailleur. The Mavic® Mektronic derailleur has many internal parts, including electronic parts. There are very few user serviceable parts.
How do I replace the rear derailleur?
Remove zip tie. Derailleur is ready to be installed. The SRAM® Force and Rival rear derailleur use an upper pivot bolt that has no internal spring. It may may be cleaned and lubricated without disassembly. The pulleys may be removed for cleaning. The lower cage pivot the should not be taken apart. Remove pulley bolts using a hex wrench.