How do I know if my Arco lamp is real?

Table of Contents

Here’s how to guarantee your Arco is 100% authentic:

Look for the logo!
The base is constructed with Carrara marble to ensure balance of the lamp.
The stem is made of stainless-steel with a satin finish, and is divided into 3 sections to achieve the delicate arc while maintaining the balance.

How much is an Arco lamp?

around $3200
Our replica is true to the original design down to every last feature. The original flos arco Floor Lamp sells for around $3200. Only Reproduction In U.S With Chrome Shade, squared arch, and foot dimmer….PH5 Pendant Lamp.

STYLE/TYPE	Arco Lamp
HEIGHT OF LAMP	93″- 95″H
DIMENSION OF MARBLE BASE	21.2″ h x 9.4″

How tall is Arco lamp?

The base supports a spun aluminum reflector via a curved stainless steel adjustable stem, allowing the lamp to offer both direct and indirect light. The height extends to almost 7-feet, allowing for easy placement of a couch or table underneath.

Who designed the Arco lamp?

Pier Giacomo Castiglioni
Achille Castiglioni
Arco/Designers

How do you move an Arco lamp?

Arco can be moved by two people by putting a broomstick in the hole in the marble base. A true FLOS classic, this lamp can be height-adjusted thanks to the three arms that make up the arch.

Is the Flos Arco floor lamp adjustable?

The Arco’s telescopic stainless steel stem has a satin-finish adding to the high-quality appearance of the piece, it can be swivelled and the height adjusted so Arco can be altered to suit one’s specific lighting needs.

Are Arco floor lamps adjustable?

Inspired by a common streetlight design, the Arco’s bulb is encased in a globe-like aluminum shade that is suspended by a thin, square stainless steel neck that can arc as high as 95 inches off the ground and 79 inches horizontally away from its base (though the arc is adjustable).

How do you install a Arco lamp?

Arco Lamp Instructions

Slide the metal rod into the slot in the lamp base.
Insert the base screw through the hole in the metal rod and base.
Pull the wiring through the metal rod and thread the wire guide onto the wiring from the top.
Thread the large channel of the lamp onto the wire from the top loose end of wire.