What are the current electrical regulations UK?

Table of Contents

BS 7671 is the 18th edition and the current standard used in the UK. It came into effect from 1st January 2019 and is the national standard used for electrical installation and wiring safety across domestic, commercial, and industrial properties.

What regulation covers electricity in the workplace?

61 Regulation 4 covers, in a general way, those aspects of electrical systems and equipment, and work on or near these, which are fundamental to electrical safety.

What are the basic safety requirements in working for electrical?

Basic safety precautions

avoid overloading sockets by providing enough socket-outlets.
where possible switch off all appliances at the mains at the end of the working day.
switch off and unplug equipment before you clean it or make adjustments.

Can I do electrical work without 18th edition?

From 01 January 2020, when Registered Electricians renew their card they must hold the 18th Edition. Without the 18th Edition, cardholders will revert back to a standard Installation or Maintenance Electrician card.

What is Regulation 14 of Electricity at Work Act?

Regulation 14 – Work on or near Live Conductors No person shall be engaged in any work on or so near any live conductor (other than one suitably covered with insulating material so as to prevent danger) that danger may arise unless: It is unreasonable in all the circumstances for it to be dead and.

Are Electricity at Work Regulations Statutory?

The Statutory Instrument to which we must adhere is the Electricity at Work Regulations 1989, made under Section 15 of the Health and Safety at Work Etc. Act 1974. This falls under the remit of criminal law and is enforced by a number of agencies, including the Health and Safety Executive (HSE) and Local Authorities.

Is the 18th edition mandatory?

What are the UK’s wiring regulations?

Wiring regulations are designed to ensure a consistent, safe approach to wiring and electrical works throughout the UK. The very first edition was released in 1882. Since then, the wiring regulations standard has evolved over the years. Subsequent editions have been published as technology and thinking on safe procedures have developed over time.

What do building regulations say about electrical devices and appliances?

Building regulations do not restrict who can carry out proposed works and neither do they define standards for the safety of electrical devices and appliances. With regards to appliances, they simply require that fixed connections are safe.

Do you comply with the 1989 electricity at Work Regulations?

Under the Health & Safety at Work Act section 17, you could be prosecuted for non-compliance with the BS 7671 regulations. It is widely accepted that compliance with the regulations and associated requirements will also ensure you comply with the 1989 Electricity at Work Regulations. Do All Electricians Need 18th Edition?

Are the electrical equipment (safety) regulations 1994 still in effect?

The Electrical Equipment (Safety) Regulations 1994 were revoked on 8 December 2016 but continue to apply to relevant products placed on the market prior to this date. 23 September 2019 Link added to guidance on how these regulations will change after Brexit. 30 August 2017 First published.